Search for courses or information

Professor Fawad Inam

Head of Engineering & Construction

Professor of Mechanical Engineering

A Principal Fellow of the Higher Education Academy (HEA), Prof Inam is among the 1% full Professors (under the age of 40) in the UK [Advance HE, Equality + higher educational staff statistical report 2019]

Professional Attributes

Fellow of the Institute of Mechanical Engineers (FIMechE)    Principal Fellow of the Higher Education Academy (PFHEA)    Chartered Engineer (CEng)    PhD (Engineering)    PGCert in Higher Education    PGCert in E-learning    BEng (Hons) - Gold Medallist

    Prof Inam moved from Northumbria University (Newcastle upon Tyne) to East London in 2018 as the head of department (engineering and computing) and professor of mechanical engineering. After 2 years of his tactful and strategic leadership, the department of engineering and computing expanded significantly, yielding more than 2700 students, 40+ courses and 55+ academics, and was transformed into two departments by the University executives, i.e. separating computing with engineering & construction. At Northumbria, Prof Inam led engineering portfolio as programme leader, director of engineering and associate head of the department from 2013 to 2018. Prior to that, he directed composite and aeronautical engineering programmes at Airbus’ Advanced Composite Training and Development Centre (2011–2013) where he contributed towards the development of Airbus A350 epoxy composites. From 2005 to 2011, he developed commercial products like Sugru and key armour/ nanostructured materials for British defence purposes as an R&D Technologist for Nanoforce Technology Limited in London. Prof Inam is in receipt of two accredited postgraduate teaching qualifications and recognised as one of the leaders (PFHEA) in engineering curriculum design and technologies. As a Chartered Engineer (CEng) and an active Fellow of the Institute of Mechanical Engineers (FIMechE), he has advised/ quality assured over 45 different universities and institutes from all the four nations of the UK. Prof Inam has formed/ strengthened TNE partnerships, delivered engineering courses and influenced institutional higher education practice in other countries like China, South Korea, Singapore, Malaysia, India, Pakistan, Saudi Arabia and the Netherlands, to list a few. With over 150 research (h-index of 31), he has presented several keynote speeches at various leading international conferences. He is a regular peer reviewer for over a dozen research journals and examined over 35 PhD theses in the UK and overseas. As a committee member of Engineering Professors’ Council (EPC), Prof Inam is advising All Party Parliamentary Group (APPG) for the Teaching Profession, GLA (Greater London Authority) Adult Education Strategy and recently Local London forum, a partnership of eight London boroughs in the north and east of the capital. He is also the recipient of the ‘Materials World Award’ conferred by the Institute of Materials, Minerals and Mining (IoM3, UK) in 2008.  



    Highlights

    Overview


    In line with the University of East London’ commitment (our Vision 2028) towards United Nations’ Sustainable Development Goals - global challenges laid down in 2015 with the aim of ensuring peace and prosperity and leaving nobody behind, Prof Inam is supporter of OPEN ACCESS research and strongly believe that research should be accessible for the mass free of charge specially for those who cannot afford it.

     

    Prof Inam’s research and enterprise expertise is primarily focused around improving the performance and functionalities of engineering products using materials science and engineering, in particular nano-influenced smart materials.

    His most recent efforts have been devoted towards the development of advanced materials (ceramics, polymers, metals and composites) and nanomaterials (including fullerenes and graphene) for aerospace, petroleum, industrial, defence and bio sectors. His expertise includes materials physics, processing, characterisation, performance evaluation, applications and sustainability.

    He has conducted several consultancies and widely published research of great commercial and scientific significance in leading peer-reviewed journal for several types of engineering materials.

    To date, with more than 150 publications (h-index: 31), he has contributed in achieving around £2.5 million research and enterprise income from government and commercial platforms (mostly as the principle investigator). Some of his funders include Royal Society, British Council, Innovate UK, Dstl/ MoD, University of London, Greater London Authority, Commonwealth Scholarship Commission etc.

     

    For citations, click on Prof Inam' GOOGLE SCHOLAR profile.

    Research

    Peer reviewed journal articles and book sections

    Daoush, Walid, Albogmy, Turki, Khamis, Moath, and Inam, Fawad (2020) Syntheses and step-by-step morphological analysis of nano-copper decorated carbon long fibers for aerospace structural applications. Crystals, 10 (12). p. 1090. ISSN 2073-4352

    Andrade-Guel, Marlene, Avila-Orta, Carlos, Cadenas-Pliego, Gregorio, Cabello-Alvarado, Christian, Pérez-Álvarez, Marissa, Reyes-Rodríguez, Pamela, Inam, Fawad, Cortés-Hernández, Dora and Quiñones-Jurado, Zoe (2020) Synthesis of nylon 6/ modified carbon black nanocomposites for application in uric acid adsorption. Materials, 13 (22). p. 5173. ISSN 1996-1944

    Saharudin, Mohd Shahneel, Hasbi, Sayafawati, Nazri, Muhammad Naguib Ahmad, Inam F. (2020) A Review of Recent Developments in Mechanical Properties of Polymer–Clay Nanocomposites. In: Emamian S., Awang M., Yusof F. (eds) Advances in Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. ISBN 978-981-15-5752-1

    Luhyna, Nataliia, Rafique, Rafaila, Iqbal, Sadia Sagar, Khaliq, Jibran, Saharudin, Mohd Shahneel, Wei, Jiacheng, Qadeer, Quratulane and Inam, Fawad (2020) Novel carbyne filled carbon nanotube – polymer nanocomposites. NanoWorld Journal, 6 (2). pp.29-34. ISSN 2379-1101

    Okolo, Chinyere, Rafique, Rafaila, Iqbal, Sadia Sagar, Saharudin, Mohd Shahneel and Inam, Fawad (2020) Carbon nanotube reinforced high density polyethylene materials for offshore sheathing applications. Molecules, 25 (13). p. 2960. ISSN 1420-3049

    Yan, Haixue, Inam, Fawad, Viola, Giuseppe, Ning, Huanpo, Zhang, Hingtao, Jiang, Qinghui, Zeng, Tao, Gao, Zhipeng and Reece, Michael (2020) Chapter 1: The contribution of electrical conductivity, dielectric permittivity and domain switching in ferroelectric hysteresis loops. Progress in Advanced Dielectrics, World Scientific, pp. 1-20. ISBN 978-981-121-042-6

    Saharudin, Mohd, Elias, Errachidi, Sofian, El Moussaoui, Boschi, Benjamin and Inam, Fawad (2020) Flexural properties of Halloysite nanotubes (HNTS) and Carbon Nanotubes (CNTS) toughened epoxy composites. International Journal of Innovative Technology and Exploring Engineering, 9 (4). p. 1670-1675. ISSN 2278-3075

    Okolo, Chinyere, Rafique, Rafaila, Iqbal, Sadia Sagar, Subhani, Tayyab, Saharudin, Mohd Shahneel, Bhat, Badekai Ramachandra and Inam, Fawad (2019) Customizable ceramic nanocomposites using carbon nanotubes. Molecules, 24 (17). p. 3176. ISSN 1420-3049

    Saharudin, Mohd Shahneel, Hasbi, Syafawati, Nazri, Muhammad Naguib Ahmad and Inam, Fawad, Osanlou, Ardeshir (2019) A review of recent developments in mechanical properties of polymer-clay nanocomposites. In: ICMMPE 2019 - Selected articles from the 5th International Conference on Mechanical, Manufacturing and Plant Engineering, Kuala Lampur, Malaysia, November 19–20, 2010, Lecture Notes in Mechanical Engineering, Springer, ISBN 2195-4356

    Luhyna, Nataliia, Excell, Peter, Day, Richard, McMillan, Alison, Inam, Fawad and Osanlou, Ardeshir (2018) Carbon nanotube technology as an option for future computing devices. In: Emerging Technologies in Computing, First International Conference, iCETiC 2018, London, UK, August 23–24, 2018, Proceedings, Springer, pp. 173-182. ISBN 978-3-319-95450-9

    Okolo, Chinyere and Inam, Fawad (2018) Observations of a novel strengthening mechanism in HDPE nanocomposites. Nanocomposites, 4 (4). pp. 215-222. ISSN 2055-0324

    Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2018) Effects of surfactants on the properties of epoxy/graphene nanocomposites. Journal of Reinforced Plastics and Composites. ISSN 0731-6844

    Iqbal, Sadia Sagar, Inam, Fawad, Bahadar, Ali, Bashir, Arshad, Hassan, Faiza, Khan, Mohammad Bilal, Khan, Zaffar and Jamil, Tahir (2018) Ablation, thermal stability/transport/phase transition study of carbon nanofiber-reinforced elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 131 (3). pp. 2637-2646. ISSN 1588-2926

    Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2018) Experimental Analysis of System Parameters for Minimum Cutting Fluid Consumption when Machining Ti-6Al-4V Using a Novel Supply System. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 2795-2809. ISSN 0268-3768

    Ahmad, Iftikhar, Islam, Mohammad, Alharthi, Nabeel, Alawadhi, Hussain, Subhani, Tayyab, Munir, Khurram, Shah, Syed Ismat, Inam, Fawad and Zhu, Yanqiu (2018) Chemical and structural analyses of the graphene nanosheet/alumina ceramic interfacial region in rapidly consolidated ceramic nanocomposites. Journal of Composite Materials, 52 (3). pp. 417-428. ISSN 0021-9983

    Villapún Puzas, Victor Manuel, Medina, Judith, Pérez, Pablo, Esat, Faye, Inam, Fawad and Gonzalez Sanchez, Sergio (2017) Strategy for preventing excessive wear rate at high loads in bulk metallic glass composites. Materials & Design, 135. pp. 300-308. ISSN 0264-1275

    Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation. Royal Society Open Science, 4 (170778). ISSN 2054-5703

    Atif, Rasheed and Inam, Fawad (2017) Fractography analysis of 1.0 wt% nanoclay/multi-layer graphene reinforced epoxy nanocomposites. Journal of Composite Materials, 51 (23). pp. 3281-3290. ISSN 0021-9983

    Atif, Rasheed and Inam, Fawad (2017) Influence of macro-topography on mechanical performance of 1.0 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. Journal of Composite Materials, 51 (19). pp. 2769-2778. ISSN 0021-9983

    Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Biodegradation of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Short Term Seawater Immersion. Polymers, 9 (8). p. 314. ISSN 2073-4360

    Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Environmental stress cracking resistance of halloysite nanoclay-polyester nanocomposites. World Journal of Engineering and Technology, 5 (3). pp. 389-403. ISSN 2331-4249

    Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

    Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) N,N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers, 9 (6). p. 193. ISSN 2073-4360

    Lopez, Isbelis, Leung, Ken, Inam, Fawad, Till, Clare and Paulsen, Andreas (2017) Mechanical characterization of protective coatings for offshore wind turbine towers and transition pieces. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 303-307. ISBN 978-1-4673-9028-6

    Gariani, Salah, Shyha, Islam, Jackson, Connor and Inam, Fawad (2017) Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid. In: Manufacturing Sciences and Technologies VII. Materials Science Forum (882). Trans Tech Publications, pp. 36-40. ISBN 9783038357322

    Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Flexural Properties of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Aggressive Environment. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering.

    Wei, Jiacheng and Inam, Fawad (2017) Processing of epoxy/graphene nanocomposites: effects of surfactants. Journal of Polymer Science & Applications, 1 (1). p. 1000101.

    Saharudin, Mohd, Atif, Rasheed and Inam, Fawad (2017) Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. Polymers, 9 (1). p. 27. ISSN 2073-4360

    Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

    Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of Nanomaterials (JNM), 2016. p. 2604631. ISSN 1687-4110

    Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of monolithic epoxy with tailored topography. World Journal of Engineering and Technology, 4 (4). pp. 517-527. ISSN 2331-4249

    Atif, Rasheed and Inam, Fawad (2016) Fractography analysis with topographical features of multi-layer graphene reinforced epoxy nanocomposites. Graphene, 5 (4). pp. 166-177. ISSN 2169-3439

    Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on mechanical performance of 0.5 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. AIMS Materials Science, 3 (4). pp. 1294-1308. ISSN 2372-0484

    Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of 0.5 wt% multi-layer graphene/nanoclay reinforced epoxy nanocomposites. AIMS Materials Science, 3 (3). pp. 1266-1280. ISSN 2372-0484

    Atif, Rasheed and Inam, Fawad (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein Journal of Nanotechnology, 7. pp. 1174-1196. ISSN 2190-4286

    Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites - a review. Polymers, 8 (8). p. 281. ISSN 2073-4360

    Iqbal, Sadia Sagar, Inam, Fawad, Iqbal, Nadeem, Jamil, Tahir, Bashir, Arshad and Shahid, Mohammad (2016) Thermogravimetric, differential scanning calorimetric, and experimental thermal transport study of functionalized nanokaolinite-doped elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 125 (2). pp. 871-880. ISSN 1588-2926

    Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay–polyester nanocomposites exposed to diluted methanol. Journal of Composite Materials, 51 (11). pp. 1653-1664. ISSN 1530-793X

    Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on damage tolerance and fracture toughness of 0.1 wt % multi-layer graphene/clay-epoxy nanocomposites. Polymers, 8 (7). p. 239. ISSN 2073-4360

    Atif, Rasheed and Inam, Fawad (2016) Modeling and simulation of graphene based polymer nanocomposites: advances in the last decade. Graphene, 5 (2). pp. 96-142. ISSN 2169-3471

    Atif, Rasheed and Inam, Fawad (2016) The dissimilarities between graphene and frame-like structures. Graphene, 5 (2). pp. 55-72. ISSN 2169-3471

    Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay/polyester. International Journal of Advances in Science Engineering and Technology, 4 (1*). pp. 42-46. ISSN 2321-9009

    Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

    Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Advances, 6 (41). pp. 34188-34197. ISSN 2046-2069

    Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2015) The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6. pp. 1076-1089. ISSN 2046-2069

    Wei, Jiacheng, Atif, Rasheed, Vo, Thuc and Inam, Fawad (2015) Graphene nanoplatelets in epoxy system: dispersion, reaggregation, and mechanical properties of nanocomposites. Journal of Nanomaterials (JNM), 2015. p. 561742. ISSN 1687-4110

    Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2015) Epoxy/ graphene nanocomposites – processing and properties: a review. RSC Advances, 90 (5). pp. 73510-73524. ISSN 2046-2069

    Daoush, Walid, Park, Hee Sup, Inam, Fawad, Lim, Byung Kyu and Hong, Soon Hyung (2015) Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering. Metallurgical and Materials Transactions A, 46 (3). pp. 1385-1393. ISSN 1073-5623

    Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures, 119. 1- 12. ISSN 0263-8223

    Katsamangas, Kostandinos, Bhat, Badekai Ramachandra and Inam, Fawad (2015) Scanning Electronic Microscopy for analysis of the effects of surfactants on de-wrinkling and dispersion of graphene. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 728-732.

    Inam, Fawad, Vo, Thuc and Bhat, Badekai Ramachandra (2014) Structural stability studies of graphene in sintered ceramic nanocomposites. Ceramics International, 40 (10 B). pp. 16227-16233. ISSN 0272-8842

    Bhat, Pooja, Inam, Fawad and Bhat, Badekai Ramachandra (2014) Oxidation of alcohols using CoFe204@APTES@Ni(OH)2. Synfacts, Highlights in Current Synthetic Organic Chemistry, 10 (11). p. 1223. ISSN 1861-1958

    Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

    Bhat, Pooja, Inam, Fawad and Bhat, Badekai Ramachandra (2014) Nickel hydroxide/ cobalt–ferrite magnetic nanocatalyst for alcohol oxidation. ACS Combinatorial Science, 16 (8). pp. 397-402. ISSN 2156-8944

    Inam, Fawad, Bhat, Badekai Ramachandra, Vo, Thuc and Daoush, Walid (2014) Structural health monitoring capabilities in ceramic – carbon nanocomposites. Ceramics International, 40 (2). pp. 3793-3798. ISSN 0272-8842

    Inam, Fawad, Bhat, Badekai Ramachandra, Luhyna, Nataliia and Vo, Thuc (2014) Comparison of structural health assessment capabilities in epoxy – carbon black and epoxy – carbon nanotube nanocomposites. Express Polymers Letters, 8 (1). pp. 55-61. ISSN 1788-618X

    Inam, Fawad, Heaton, Andrew, Brown, Peter, Peijs, Ton and Reece, Michael (2014) Effects of dispersion surfactants on the properties of ceramic – carbon nanotube (CNT) nanocomposites. Ceramics International, 40 (1). pp. 511-516. ISSN 0272-8842

    Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2014) Static behaviour of functionally graded sandwich beams using a quasi-3D theory. Composites Part B: Engineering, 68. 59- 74. ISSN 1359-8368

    Bhat, Aparna, Inam, Fawad and Bhat, Badekai Ramachandra (2013) One-step synthesis of biaryls under mild conditions. European Journal of Organic Chemistry, 2013 (31). pp. 7139-7144. ISSN 1434-193X

    Bhat, Aparna, Inam, Fawad and Bhat, Badekai Ramachandra (2013) Nickel catalyzed one pot synthesis of biaryls under air at room temperature. RSC Advances, 44 (3). pp. 22191-22198. ISSN 2046-2069

    Inam, Fawad, Vo, Thuc, Jones, Jonathan and Lee, Xu (2013) Effect of carbon nanotube lengths on the mechanical properties of epoxy resin: an experimental study. Journal of Composite Materials, 47 (19). pp. 2321-2330. ISSN 0021-9983

    Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien and Inam, Fawad (2013) Static and vibration analysis of functionally graded beams using refined shear deformation theory. Meccanica. pp. 1-14. ISSN 0025-6455

    Luhyna, Nataliia, Inam, Fawad and Winnington, Ian (2013) Shortening curing durations for carbon nanotube reinforced epoxy. Research Notes, 41 (1). pp. 17-22.

    Vo, Thuc, Thai, Huu-Tai and Inam, Fawad (2013) Axial-flexural coupled vibration and buckling of composite beams using sinusoidal shear deformation theory. Archive of Applied Mechanics, 83 (4). pp. 605-622. ISSN 0939-1533

    Puchy, Viktor, Hvizdos, Pavol, Dusza, Ján, Kovac, Frantisek, Inam, Fawad and Reece, Michael (2013) Wear resistance of Al2O3–CNT ceramic nanocomposites at room and high temperatures. Ceramics International, 39 (5). pp. 5821-5826. ISSN 0272-8842

    Inam, Fawad, Reece, Michael and Peijs, Ton (2012) Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites. Journal of Composite Materials, 46 (11). pp. 1313-1322. ISSN 0021-9983

    Cui, Bai, Sa, Rafael, Jayaseelan, Daniel, Inam, Fawad, Reece, Michael and Lee, William Edward (2012) Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti2AlN ceramics. Acta Materialia, 60 (3). pp. 1079-1092. ISSN 1359-6454

    Patel, Bhairav, Favaro, Gregory, Inam, Fawad, Reece, Michael, Angadji, Arash, Bonfield, William, Huang, Jie and Edirisinghe, Mohan (2012) Cobalt-based orthopaedic alloys: Relationship between forming route, microstructure and tribological performance. Materials Science and Engineering: C, 32 (5). pp. 1222-1229. ISSN 0928-4931

    Milsom, Ben, Viola, Giuseppe, Gao, Zhipeng, Inam, Fawad, Peijs, Ton and Reece, Michael (2012) The effect of carbon nanotubes on the sintering behaviour of zirconia. Journal of the European Ceramic Society, 32 (16). pp. 4149-4156. ISSN 0955-2219

    Patel, Bhairav, Edirisinghe, Mohan, Inam, Fawad, Reece, Michael, Bonfield, William, Huang, Jie and Angadji, Arash (2012) A novel route for processing Co-Cr-Mo orthopaedic alloys. The Journal of Bone & Joint Surgery, British Volume, 94-B (SUPXXV). p. 182. ISSN 0301-620X

    Cho, Johann, Inam, Fawad, Reece, Michael, Chlup, Zdeněk, Dlouhy, Ivo, Shaffer, Milo and Boccaccini, Aldo (2011) Carbon nanotubes: do they toughen brittle matrices? Journal of Materials Science, 46 (14). pp. 4770-4779. ISSN 0022-2461

    Chaudhry, Aqif, Yan, Haixue, Gong, Keenan, Inam, Fawad, Viola, Giuseppe, Reece, Michael, Goodall, Josephine, ur Rehman, Ihtesham, McNeil-Watson, Fraser, Corbett, Jason, Knowles, Jonathan and Darr, Jawwad (2011) High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering. Acta Biomaterialia, 7 (2). pp. 791-799. ISSN 1742-7061

    Puchy, Viktor, Dusza, Ján, Inam, Fawad and Reece, Michael (2011) Indentation toughness of Al2O3-CNT nanocomposites. Chemické Listy, 105. pp. 842-843. ISSN 1213-7103

    Puchy, Viktor, Dusza, Ján, Hvizdos, Pavol, Inam, Fawad and Reece, Michael (2011) Mechanical and electrical properties of Al2O3-CNT nanocomposites. Chemické listy, 105 (SI). s635-s637. ISSN 1213-7103

    Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2011) Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering. Advanced Engineering Materials, 13 (5). pp. 411-417. ISSN 1438-1656

    Yan, Haixue, Inam, Fawad, Viola, Giuseppe, Ning, Huanpo, Zhang, Hingtao, Jiang, Qinghui, Zeng, Tao, Gao, Zhipeng and Reece, Michael (2011) The contribution of electrical conductivity, dielectric permittivity and domain switching in ferroelectric hysteresis loops. Journal of Advanced Dielectrics, 01 (01). pp. 107-118. ISSN 2010-135X

    Inam, Fawad, Peijs, Ton and Reece, Michael (2011) The production of advanced fine-grained alumina by carbon nanotube addition. Journal of the European Ceramic Society, 31 (15). pp. 2853-2859. ISSN 0955-2219

    Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2010) A novel route for processing cobalt-chromium-molybdenum orthopaedic alloys. Journal of The Royal Society Interface, 7 (52). pp. 1641-1645. ISSN 1742-5689

    Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2010) The sintering and grain growth behaviour of ceramic–carbon nanotube nanocomposites. Composites Science and Technology, 70 (6). pp. 947-952. ISSN 0266-3538

    Inam, Fawad, Yan, Haixue, Reece, Michael and Peijs, Ton (2010) Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite. Advances in Applied Ceramics, 109 (4). pp. 240-247. ISSN 1743-6753

    Inam, Fawad, Wong, Doris, Kuwata, Manabu and Peijs, Ton (2010) Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers. Journal of Nanomaterials, 2010. p. 453420. ISSN 1687-4110

    Inam, Fawad, Yan, Haixue, Jayaseelan, Daniel, Peijs, Ton and Reece, Michael (2010) Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering. Journal of the European Ceramic Society, 30 (2). pp. 153-157. ISSN 0955-2219

    Cui, Bai, Sa, Rafael, Jayaseelan, Daniel, Inam, Fawad, Reece, Michael and Lee, William Edward (2010) Microstructural evolution during high-temperature oxidation of Ti2AlN ceramics. Advances in Science and Technology, 65. pp. 106-111. ISSN 1662-0356

    Inam, Fawad, Yan, Haixue, Tu, Wei and Reece, Michael (2010) Sparking advanced ceramics. Materials World, 18 (5). pp. 26-28. ISSN 0967-8638

    Jackson, Heather, Jayaseelan, Daniel, Clegg, William, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti and Lee, William Edward (2010) Microstructure of laser-melted zirconium carbide ceramics. In: Advances in Materials Science for Environmental and Nuclear Technology. Ceramic Transactions, 222 . Wiley, Hoboken, pp. 113-125. ISBN 978-0-470-92729-8

    Jackson, Heather, Daniel, Doni, Clegg, William, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, de Bruycker, Franck, Boboridis, Konstantinos and Lee, William Edward (2009) Laser melting of spark plasma sintered zirconium carbide: thermophysical properties of a generation IV very high temperature reactor material. In: Ceramics in Nuclear Applications. Wiley, Hoboken, pp. 161-172. ISBN 978-0-470-457603

    Jackson, Heather, Jayaseelan, Daniel, Lee, William Edward, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, de Bruycker, Franck and Boboridis, Konstantinos (2009) Laser melting of spark plasma-sintered zirconium carbide: thermophysical properties of a generation IV very high-temperature reactor material. International Journal of Applied Ceramic Technology, 7 (3). pp. 316-326. ISSN 1546-542X

    Dusza, Ján, Blugan, Gurdial, Morgiel, Jerzy, Kuebler, Jakob, Inam, Fawad, Peijs, Ton, Reece, Michael and Puchy, Viktor (2009) Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of the European Ceramic Society, 29 (15). pp. 3177-3184. ISSN 0955-2219

    Inam, Fawad, Yan, Haixue, Reece, Michael and Peijs, Ton (2008) Dimethylformamide: an effective dispersant for making ceramic–carbon nanotube composites. Nanotechnology, 19 (19). p. 195710. ISSN 0957-4484

    Inam, Fawad, Yan, Haixue, Zhang, Rui, Peijs, Ton and Reece, Michael (2007) Firing on all cylinders - carbon nanotube-based composites. Materials World, 15 (10). pp. 24-25. ISSN 0967-8638

    Inam, Fawad and Peijs, Ton (2006) Re-aggregation of carbon nanotubes in two-component epoxy system. Journal of Nanostructured Polymers and Nanocomposites, 2 (3). pp. 87-95. ISSN 1790-4439

    Inam, Fawad and Peijs, Ton (2006) Transmission light microscopy of carbon nanotubes-epoxy nanocomposites involving different dispersion methods. Advanced Composites Letters, 15 (1). pp. 7-13. ISSN 0963-6935



     

    Conference/ workshop outputs

    Inam, Fawad (2019) Fullerenes for engineering applications (keynote speech). In: NEDAMPE 2017 - 2nd International Conference on Advanced Materials and Process Engineering, December 14-15 2019, Karachi, Pakistan.

    Inam, Fawad (2018) Carbon nanotube filled thermoplastic nanocomposites in oil/ gas applications (keynote speech). In: 4th International Conference on Structural Nano Composites (NANOSTRUC 2017), 23-24 May, 2018, Berlin, Germany.

    Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

    Okolo, Chichi and Inam, Fawad (2017) Fullerene based polymeric nanocomposites for advanced oil/gas subsea applications (keynote speech). In: NEDAMPE 2017 - 2nd International Conference on Advanced Materials and Process Engineering, 12th - 13th December 2017, Karachi, Pakistan. Funded by Engro Corp.

    Okolo, Chichi and Inam, Fawad (2017) Advanced nanocomposite materials for subsea oil & gas production. In: Applied Nanotechnology and Nanoscience International Conference 2017, 18-20 October, 2017, Rome, Italy.

    Inam, Fawad, Okolo, Chichi, Vo, Thuc and Iqbal, Sadia Sagar (2017) Engineering properties of graphene - ceramic nanocomposites by incorporating defects in graphene. In: WCSM-2017 - 3rd Annual World Congress of Smart Materials-2017, 16th - 18th March, 2017, Bangkok, Thailand.

    Inam, Fawad and Okolo, Chichi (2016) Fullerenes for enhanced performance of novel nano-exploited aircraft materials (keynote speech). In: 14th Eurasia Conference on Chemical Sciences (EuAsC2S), 15th - 18th December 2016, Karachi, Pakistan.

    Inam, Fawad (2016) Processing fullerenes for next generation HPHT thermoplastic umbilical systems (keynote speech). 4th International Conference on Polymer Processing and Characterization (ICPPC-2016), 9-11 December 2016, Kerala, India.

    Okolo, Chichi, Rutherford, Alan, Wood, Chris and Inam, Fawad (2016) Dynamic mechanical analyses for molecular level engineering of advanced subsea polymers. In: 3rd International Conference on Structural Nano Composites (NANOSTRUC 2016), 12-15 September, 2016, Aberdeen, UK.

    Inam, Fawad (2016) Graphene for Smart Materials Engineering (keynote speech).3rd Brazilian Conference on Composites Materials (BCCM3), 28-31 August 2016, Gramado, Brazil. Funded by IoM3, Du Pont, JEC group, netcomposites, Toho Tenax, SAMPE and Composites UK.

    Inam, Fawad, Okolo, Chichi and Vo, Thuc (2016) Damage sensing ability of polymer nanocomposites filled with long, shortened and damaged carbon nanotubes. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

    Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Reinforcement effect of graphene on the mechanical properties of epoxy. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

    Gariani, Salah, Shyha, Islam and Inam, Fawad (2016) Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

    Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In: ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering, 10th - 13th May 2016, Istanbul, Turkey.

    Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Processing of epoxy/ graphene nanocomposites. In: 6th Chemical Nanoscience Symposium (CNSN-6), 17 March 2016, Newcastle upon Tyne.

    Aravinda, L. S., Bhat, K. Udaya, Wei, Jiacheng, Inam, Fawad and Bhat, Badekai Ramachandra (2015) Flexible Binder free electrode for ultracapacitor. In: 5th Chemical Nanoscience Symposium (CNSN-5), 26 March 2015, Newcastle upon Tyne.

    Inam, Fawad (2015) Fullerenes for Airbus A350’ wings (keynote speech). In: 4th International Conference on Aerospace Science and Engineering (ICASE-2015), 2-4 September 2015, Islamabad, Pakistan. Funded by IEEE.

    Inam, Fawad (2014) Structural health assessing capabilities in polymeric and ceramic nanocomposites filled with carbon nanofillers. In: International Conference on Structural Nano Composites (NANOSTRUC 2014), 20-21 May, 2014, Madrid, Spain. Funded by FP7 and KTN Nanotechnology.

    Vo, Thuc, Osofero, Israel, Corradi, Marco and Inam, Fawad (2014) Free vibration of axially loaded functionally graded sandwich beams using refined shear deformation theory. In: ECCM-16th European Conference on Composite Materials, 22 - 26 June 2014, Seville, Spain.

    Inam, Fawad (2014) Carbon nanotechnology for future aerospace. In: International Conference on Nanomaterials and Nanotechnology 2014 (ICNN-2014), 7-9 April 2014, Karachi, Pakistan.

    Luhyna, Nataliia, Vo, Thuc and Inam, Fawad (2013) Carbon nanotubes for next generation aircraft materials (keynote speech). In: Third International Conference on Aerospace Science and Engineering (ICASE-2013), 21-23 August 2013, Islamabad, Pakistan. Funded by IEEE.

    Inam, Fawad (2013) Science led vs design led teaching approaches in materials science and engineering for aeronautical engineering students. In: 5th International Materials Education Symposium, 4-5 April 2013, Murray Edwards College, University of Cambridge, UK.

    Luhyna, Nataliia, Inam, Fawad and Winnington, Ian (2013) Rapid microwave processing of epoxy nanocomposites using carbon nanotubes. In: Third International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 13-16 May 2013, Wrexham, North Wales.

    Vo, Thuc and Inam, Fawad (2012) Vibration and buckling of cross-ply composite beams using refined shear deformation theory. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

    Luhyna, Nataliia and Inam, Fawad (2012) Carbon nanotubes for epoxy Nanocomposites: a review on recent developments. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

    Inam, Fawad (2012) E‐learning for aerospace apprentices studying materials engineering: a teacher’s perspective. In: 4th International Materials Education Symposium, 12-13 April, 2012, Cambridge, UK.

    Inam, Fawad, Vo, Thuc and Kumara, Saman (2012) Improving oxidation resistance of carbon nanotube nanocomposites for aerospace applications. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

    Milsom, Ben, Viola, Giuseppe, Inam, Fawad and Reece, Michael (2012) The sintering of ceramic - CNT structural composites. In: ECerS XII - 12th Conference of the European Ceramic Society, 19-23 June 2011, Stockholm, Sweden.

    White, Ashley, Inam, Fawad, Pattinson, Sebastian, Reece, Michael, Windle, Alan and Best, Serena (2011) Comparison of properties and microstructure of dense hydroxyapatite-carbon nanotube composites prepared by spark plasma sintering and pressureless sintering. In: 2011 MRS Spring Meeting & Exhibit, 26-29 April 2011, San Francisco, USA.

    Subhani, Tayyab, Cho, Johann, Inam, Fawad, Reece, Michael, Lee, William Edward, Boccaccini, Aldo and Schaffer, Milo (2011) Glass composites containing carbon nanotubes: Processing, characterisation and prospects for toughening. In: 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC 2011), 23-28 January, 2011, Daytona Beach, FL, USA.

    Milsom, Ben, Viola, Giuseppe, Inam, Fawad and Reece, Michael (2011) The effect of CNTs on the sintering and grain growth of ceramics. In: SINTERING 2011, 28 August - 1 September 2011, Jeju, South Korea.

    Patel, Bhairav, Edirisinghe, Mohan, Inam, Fawad, Reece, Michael, Bonfield, William, Huang, Jie and Angadji, Arash (2010) A novel route for processing Co-Cr-Mo orthopaedic alloys. In: The 23d Annual Congress of the International Society for Technology in Anthroplasty (ISTA 2010), 6-9 October 2010, Intercontinental Hotel, Dubai, UAE.

    Inam, Fawad and Reece, Michael (2010) Nanostructured armour materials. In: Defence Ceramics Network Seminar (DCERN-4), 28 April 2010, Cranfield University, Swindon, UK.

    Inam, Fawad, Heaton, Andrew, Brown, Peter, Peijs, Ton and Reece, Michael (2010) Effect of dispersant surfactants on the properties of alumina-carbon nanotubes nanocomposites. In: 12th International Ceramics Congress, CIMTEC 2010, 6-11 June, 2010, Montecatini Terme, Italy.

    Inam, Fawad and Reece, Michael (2010) Texturing in silicon carbide nanocomposites by Spark Plasma Sintering. In: Defence Ceramics Network Seminar (DCERN-5), 22 September 2010, University of Surrey, Guildford.

    Puchy, Viktor, Dusza, Ján, Blugan, Gurdial, Morgiel, Jerzy, Kuebler, Jakob, Inam, Fawad, Peijs, Ton and Reece, Michael (2009) Microstructure and properties of zirconia/carbon nanofiber composites. In: The Eighth Students' Meeting on Processing and Applications of Ceramics (SM 2009), 2-5 December, 2009, Novi Sad, Serbia.

    Inam, Fawad (2009) Ceramic – carbon nanotube nanocomposites. In: Young Persons' Lecture Competition (Workshop) - London Local Heat (YPLC 2009), 14 February 2009, London Materials Society, IoM3, London, UK.

    Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2008) Electrically conductive alumina – carbon nanocomposites prepared by spark plasma sintering. In: Cambridge CNT Symposium 2008, 5 December, 2008, Cambridge, UK.

    Inam, Fawad, Reece, Michael and Peijs, Ton (2008) Conductive ceramic-carbon nanotube composites. In: HiPerNano 2008 - Nano-enhanced Materials for Extreme Environments, 19 May 2008, BERR Conference Centre, London, UK.

    Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2008) Electrically conductive carbon reinforced ceramic nanocomposites prepared by spark plasma sintering. In: Electroceramics XI, 31 August - 4 September 2008, Manchester, UK.

    Inam, Fawad, Yan, Haixue, Reece, Michael and Peijs, Ton (2008) Spark Plasma Sintering (SPS) of ceramic – carbon nanotube nanocomposites. In: Gordon Research Conferences on Composites, 13-18 January, 2008, Ventura, California, USA.

    Inam, Fawad and Peijs, Ton (2007) Multiscale micro-nanocomposite laminates based on carbon nanotubes and carbon fibres. In: CNT-NET 07, 10-12 September 2007, Trinity College, University of Cambridge.

    Inam, Fawad and Peijs, Ton (2007) Re-agglomeration of carbon nanotubes in two-part epoxy system; influence of the concentration. In: 5th International Bhurbhan Conference on Applied Science and Technology (IBCAST 2007), 8-11 January 2007, Islamabad, Pakistan.

    Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2007) Improving oxidation resistance of carbon nanotubes for sensing applications. In: CNT @ Symposium: A Mini-Symposium on the Science and Application of Carbon Nanotubes, 30 November 2007, Churchill College, University of Cambridge.

    Inam, Fawad, Farooq, Muhammad and Shahid, Muhammad (2005) Designing of a solar-powered cathodic protection system for a ~50 km long buried natural gas pipeline located in Sindh, Pakistan. In: 9th International Symposium on Advanced Materials (ISAM 2005), 19-22 September, 2005, Islamabad, Pakistan.

    Wadood, Abdul, Inam, Fawad, Shah, Imtiaz and Shakoor, Rana (2005) Health and safety in electric welding process. In: 2nd National Seminar on welding science and technology, 15-17 March 2005, Islamabad, Pakistan.

    Inam, Fawad and Wadood, Abdul (2002) Characterization of Hastelloy C-276. In: 3rd International and 13th National Chemistry Conference, 28-31 December 2002, University of Karachi, Karachi, Pakistan.

    Highlights

    Publications

    Foam seating products for the automotive sector, № 11215 (with Lear Corporation UK Ltd), Innovate UK, £300193, May 2018 – Feb 2020

    Umbilical composite materials development – industrial research contract, № RCR00863, TechnipFMC PLC, UK, £114000, Jan 2018 – Dec 2020

    Invited key note speaker for 2nd International Conference on Advanced Materials & Process Engineering (AMPE 2018), Higher Education Commission, Pakistan, £1091, Mar – Dec 2016

    Corrosion analyses of bearings and polymeric blends at Lear Corporation UK Ltd (№ CON01929), Lear Corporation, UK, £7200, Oct 2017 – Dec 2017

    Invited key note speaker for 4th International Conference on Polymer Processing and Characterization (ICPPC 2016), Mahatma Gandhi University, India, £315, Mar – Dec 2016

    Mass production of advanced materials for subsea umbilicals, № 10100 (with TechnipFMC PLC, UK), Innovate UK, £129630, Jul 2015 – Oct 2017

    Production of novel cost- effective and wear resistant, shape memory alloys (№ RG150057), The Royal Society, UK, £15000, Jan – Dec 2016

    Mechanical characterisations of sub-size samples from gas turbine blades (№ CON01540), Osborne Engineering Ltd (OEL), Cramlington, UK, £3408, Aug – Oct 2015

    Invited key note speaker for ICASE2015 conference (international travel, registration fee and accommodation) IST, Government of Pakistan, Pakistan, £980, Sep 2015

    Invited key note speaker for 3rd Brazilian Conference on Composites Materials (BCCM3). Toho Tenax, Brazil, £250, Mar – Aug 2016

    MSc in Pipeline Engineering – flying faculty programme for Saudi Aramco, in partnership with Penspen Ltd. Saudi Aramco, Saudi Arabia, £1215200, Jan 2015 – Dec 2016

    Manufacturing of carbon nanocomposite electrodes for ultracapacitors (research support grant, INCF-2014-56), Commonwealth Scholarship Commission, UK, £1600, Jan – Mar 2015

    Invited key note speaker for 3rd International Conference on Polymer Processing and Characterization (ICPPC-2014), Mahatma Gandhi University, India, £350, Oct 2014

    Academic consultancy, Materials and Manufacture (IDEMF001), The Northern Consortium (NCUK), University of Manchester, UK, £1120, Aug 2014 – Jun 2015

    Invited key note speaker for NANOSTRUC 2014, Spain, Institute of Physics, UK, £604, May 2014

    Rotor blade hardness testing (№ CON01140), Osborne Engineering Ltd (OEL), Cramlington, UK, £3700, Oct – Nov 2013

    Virtual Tensile Testing Laboratory and e-manufacturing of samples (project output: www.mse.4mg.com), The Higher Education Academy, UK, £1020, Jun 2013

    National Conference Grant (to attend teaching conference, organised by the University of Cambridge), Glyndŵr University, UK, £430, Apr 2013

    National Conference Grant (to attend teaching conference organised by the University of Cambridge), UKCME, University of Liverpool, £500, Apr 2012

    Partial support for the organisation of the annual conference (ACMTAA-2013), Institute of Physics, UK, £850, May 2013

    Development of Composite Materials Manufacturing Research Facility at Composite Centre, Hawarden Airport (Broughton), HEFCW, Wales, £75000, Mar 2011

    Processing and development of ceramic nanocomposites, № DSTLX-1000026924, Dstl, Ministry of Defence (MoD), UK, £160000, Sep 2009 – Dec 2010

    Modified lower metallic ram for SPS furnace for advanced nanomaterials, № DSTLX-1000039570, Dstl, Ministry of Defence (MoD), UK, £7800, Apr 2009 – Oct 2010

    Production of tungsten nanostructured alloys for nuclear applications (in collaboration with MG Sanders Co Ltd, Stone), Technology Strategy Board (Innovate UK), £20000, May 2010

    The Materials Entrepreneur Conference Bursary Award, UKCME, University of Liverpool, £300, Apr 2010

    Processing and development of Tantalum based foams for bio-applications, University of Sheffield, UK, £2000, Aug 2009

    Front pyrometer for SPS furnace for advanced nanomaterials, № DSTLX-1000022752, Dstl, Ministry of Defence (MoD), UK, £19750, Aug 2009 – Sep 2009

    Processing and development of silicon carbide nanocomposites, № DSTLX-1000020534, Dstl, Ministry of Defence (MoD), UK, £40000, Apr 2009 – Oct 2009

    Processing and development of alumina nanocomposites, № DSTLX-1000013714, Dstl, Ministry of Defence (MoD), UK, £40000, Sep 2008 – Mar 2009

    Spark Plasma Sintering of Ultra-High Temperature Ceramics (UHTCs), № MM/2496676 & № MM/2317609, Imperial College, London, £12000, Dec 2007 – Mar 2009

    Spark Plasma Sintering of Tungsten Carbide - Cobalt Cermets, University of Wolverhampton, £3200, Mar – Jun 2007

    International Research Studentship (MPhil leading to PhD), University of London, £96580, Sep 2005 – Mar 2009

    Research, Enterprise & Reward Scheme 2016/17 (№ IO: 512105), REF UoA12 @ Northumbria University, £15000, Aug 2018 – Jul 2018

    University of Sheffield Travel Grant (№ IO: 512787), REF UoA12 @ Northumbria University, £550, May 2018 – Jul 2018

    Research, Enterprise & Reward Scheme 2017/18 (№ IO: 513073), REF UoA12 @ Northumbria University, £7804, Oct 2017 – Jul 2018

    Research, Enterprise & Reward Scheme 2016/17 (№ IO: 512105), REF UoA12 @ Northumbria University, £3443, Sep 2016 – Jul 2017

    International travel grant for presenting at 5th Annual World Congress of Advanced Materials (WCAM2016), China, REF UoA15 @ Northumbria University, £869, Feb – Jun 2016

    Fully-funded research studentships supervision, REF UoA15 @ Northumbria University, £70000, Sep 2015 – Aug 2018

    Virtual Engineering Laboratories, Teaching Quality Enhancement Funds (TQEF), £500, Oct 2015 – Jun 2016

    Dynamic Mechanical Analyser (DMA) – Internal bidding CapEx 2014 (Northumbria University), £35000, May 2014

    International travel grant for keynote speech at ICNN 2014, REF UoA15 @ Northumbria University, £1120, Apr 2014

    Highlights

    Funding