CITE - Innovative Informatics

Publication List

Refereed journal papers:

• Hosny, W., Dobrucky, B., “Harmonic Distribution and reactive power Compensation in single phase power Systems using Orthogonal transformation Strategy’, WASEAS Transactions on Power Systems, Issue 4, Volume 3, April 2008.

• Chanerley, A.,A., Alexander, N.A., ‘Obtaining Estimates of the Low-frequency Fling, Instrument Tilts and Displacement Time Series using wavelet Decomposition’, Bull Earthquake Engineering, 2010, 8:231-255, DOI 10.1007/s 105 18-009-9150-5.

• Mueck, M., Lota, J. Et al, ‘ETSI Reconfigurable Radio Systems Status and Future Directions on Software Defined Radio and Cognitive Radio standards’, IEEE comm.Advances in IEEE Standards & test beds for Cognitive radio Networks, to be published August 2010.

• Peter Büchner,  J Vittek, S. J. Dodds, ‘Position Control of Linear Synchronous Motor Drives with Exploitation of Forced Dynamics Control Principles - Polohové riadenie pohonov s lineárnym synchrónnym motorom s využitím princípov riadenia s vnútenou dynamikou’,  Advances in Electrical and Electronic Engineering, y. 2004, vol. 3, No. 2,  pp. 273 – 277.

• Vittek, J., Michalík J. S. J. Dodds and Perryman, R. ‘Preliminary Experimental Results for Indirect Vector Control of Induction Motor with Forced Dynamics’, ()  Advances in Electrical and Electronic Engineering, y. 2003, vol. 2, No. 2,  pp. 3 – 11.

• ‘New trends in Electric Drives – Forced Dynamics and Shaft Sensorless Control’ II. Part (with Hrasko, M., Kastier, R., Vanko, D., Styskala, V., Kuchar, M., Stepanec, L., Dodds, S.J. and Perryman, R.), Elektrotechnika v praxi, (Electrotechnic in Practise, in Czech) No. 1/2 2003, Czech Republic,  pp.8-11.

• R. Ruocco, T. White and D. Jarrett, ‘Systematic errors in active 3-D vision sensors’, IEE Proceedings Vision, Image & Signal Processing, Vol 150, No 6, Dec 2003, ISSn 1350245X, pp 341-5

• R Perryman, L M C Mhango, 'Analysis and Simulation of a High Speed 2-phase AC Drive for Aerospace Applications', IEE Proc., Pt B, Electric Power Applications, Vol. 144, Issue 2, 2004.

• W M Hosny and A Rojeab, " Power Loss and Relative Permeability of Annealed Amorphous Magnetic Cores for Electrical Machines", Electric Machines and Power Systems Journal, Vol.4, June 2002

• A A Chanerley and N A Alexander, ‘An approach to seismic correction which includes wavelet de-noising’, Proceedings of the 6th International Conference on Computational Structures Technology, Prague, Czech Republic, 2002.

• A G Luk’yanov, V I Utkin, S J Dodds, and J Vittek, ‘Decomposed Control Design for Non-Stationary Plants Subject to Disturbances’, Int. J. Control, ISSN 0020, 2001, Vol. 74, No. 13, pp. 1335-1352.

• J Vittek, S J Dodds, J Altus and R Perryman, ‘Vector-Controlled Reluctance Synchronous Motor drives with Prescribed Closed-Loop Dynamics’, Automatika, ISSN 0005-1144, 42 (2001) 1-2, pp. 29-36.

Keynote/Invited Papers in proceedings of conferences and similar events:

• S J Dodds,‘Forced Dynamic Control’, AICE 2005 International Conference on Advances in Information and Communication Engineering, Akra, Ghana, Invited Paper, ISBN 9988-643-13-6, pp 3-8., August 2005

• S J Dodds, ‘A Novel Approach to Robust Motion Control of Electrical Drives with Model Order Uncertainty’ Elektro 2004 International Conference, Zilina, Slovakia, May 2004     (Keynote Paper, also published in the ASEEE Journal)

Refereed papers in proceedings of conferences and similar events:

• Hosny,W., Dobrucky,B. and Pokorny,M. “Virtual Two Axes Strategy for Speeding up the Determination of the Reference Current in Single Phase Active Power Filters”, to be published in the Proceedings of AC&T09, School of Computing and Electronics, University of East London, January 2009.

• Hosny,W. and Dobrucky, B., “Novel Strategy for Compensating Current Determination in Single Phase active Power filters”, Proceedings of the 3rd IASME/WASEAS International Conference on Energy&Environment (EE’08), University of Cambridge, Cambrige, UK, Feburay 23-25, 2008.

• Hosny, W., “Power Engineering Mobile Education Technology”, 42nd International Universities Power Engineering Conference, 4th-6th September 2007, Faculty of Science and Engineering, University of Brighton.

• Hosny, W. and Dobrucky, B., “Harmonic Distortion and Reactive Power Compensation in single Power Systems Using Orthogonal Transformation Technique”, 42nd International Universities Power Engineering Conference, 4th-6th September 2007, Faculty of Science and Engineering, University of Brighton.

• Hosny, W. and Arreymbi, J., “Adopting Mobile Technologies for Education and M-Learning”, 25th-28th June 2007, The 2007 World Congress in Computer Science, Computer Engineering and Applied Computing, Monte Carlo Resort & Casino, Las Vegas, USA.

• Hosny, W., “Optimal Mix for Blended Delivery of Electrical Engineering Programme at the University of East London”, Second International Blended Learning Conference, “Support the Net Generation Learner”, 14th June 2007, University of Hertfordshire.

• S. J. Dodds, P.A. Stadler and H. G. Wild, ‘Control of a Vacuum Air Bearing Based Linear Motor Using Observer Based Robust Control’, IASTED 2007, Innsbruck, Austria.

• S. J. Dodds and K. Szabat, ‘Forced Dynamic Control of Electric Drives with Vibration Modes in the Mechanical Load’, EPE-PEMC 2006, Portoroz, Slovenia.

• P. A. Stadler, Th. Fankhauser, H. G. Wild, S. J. Dodds, ‘Controlling a Piezoelectric Actuated Positioning Unit Using a State Space Controller and an Observer’, Actuator 2006, Bremen, Germany.

• P.A. Stadler, S. J. Dodds, and H. G. Wild, ‘Comparison Of Nanometer Motion Control Techniques for Vacuum Air Bearings, Control 2006, Edinburgh, Scotland.

• G. Sooriyakumar, R. Perryman and S. J. Dodds, ‘Improved Cogging Calculation Methods for Surface Mounted Permanent Magnet Synchronous Motors’, UPEC 2006, UK.

• N. P. Snailum, ‘Thermal Footprint Detection’, Proceedings of the AC&T 2006, School of Computing, Information Technology and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• T. Wu, N. P. Snailum and W. M. Hosny, ‘Image Processing Techniques in a Server Robot Waiterless Restaurant’, Proceedings of the AC&T 2006, School of Architecture, Computing and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• A. Chanerley and N Alexander, ‘A brief Review of Instrument De-Convolution of Seismic Data’, Proceedings of the AC&T 2006, School of Computing, Information Technology and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• S. J. Dodds, ‘Forced Dynamic Control: A Model Based Control Technique Illustrated by a Road Vehicle Control Application’, Proceedings of the AC&T 2006, School of Computing, Information Technology and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• S. J. Dodds, ‘Hyper Sliding Mode Control: A Novel Approach Achieving Robustness with Model Order Uncertainty’, Proceedings of the AC&T 2006, School of Computing, Information Technology and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• L. M. C. Mhango, R. Perryman, ‘High Efficiency and High Speed PM Motors for the More Electric Aircraft’, Proceedings of the AC&T 2006, School of Computing, Information Technology and Engineering, University of East London, UK, ISBN 0-9550008-1-5.

• Makys, P.,  Stulrajter M.,  Dodds S.J. and Perryman, R. ‘Servo-Position Control with Dynamic Lag Precompensator for PMSM Drives’,  Proceedings of OPTIM’2004 Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, May 2004, vol. III,  pp.77-84.

• Racek, V.,  Dodds, S. J. and Perryman, R. ‘Near Time-Optimal Position Control of an Actuator with Permanent Magnet Synchronous Motor’, Proceedings of the First Asia International Symposium on Mechatronics (AISM 2004), September 27-30, 2004, Xi’an, China, CD-Rom.

• S J Dodds, S Jayasoma and R Perryman, ‘Robust Control of Synchronous Motor Drives Using Load Torque Estimation: an FPGA Implemented Synchronous Motor Application’, EPE-PEMC 2002, Dubrovnik, Croatia, (Invited Paper).

• S J Dodds and J Vittek, ‘Near-Time-Optimal Position Control of Electrical Drives with Reluctance Synchronous Motor’, EPE 2001, Graz, Austria.

• V Yu Rutkovsky, S D Zemlyakov, V M Glumov, and S J Dodds, ‘Anti-resonance Control of a Free-Flying Automated Module for Transportation of Highly Flexible Pay-loads’, COC (Control of Chaotic Systems) 2001.

• V Yu Rutkovsky, S D Zemlyakov, V M Glumov, V M Sukhanov and S J Dodds, ‘Adjustable Boundedness Algorithms for Control Systems’, Control 2000, Cambridge, UK.

• S J Dodds and J Vittek, ‘A New Control Method for AC Motor Drives’, 8th International Conference on Power Electronics and Motion Control, PEMC’98, Prague, Czech Republic, 8-10 September, 1998, pp. 173-178.

• H G Wild and S J Dodds, ‘Real-Time Identification of the Friction Coefficient of a Rolling Guided High Dynamic Linear Motor’, UKACC International Conference, Control’98, 1-4 September, 1998, pp. 1129-1133.

• H G Wild and S J Dodds, ‘Robust Control of High Dynamic Linear Motors’, 4th International Conference on Motion and Vibration Control, Movic’98, ETH, Zurich, Switzerland, 25-28 August, 1998, pp. 261-266.

• J Vittek, J Altus, S J Dodds, R Perryman, ‘Preliminary Experimental Results for Synchronous Motor Drive with Forced Dynamics’, IASTED International Conference on Control and Applications, Honolulu, Hawaii, 12-14 August, 1998.

• S J Dodds, ‘Development of Spacecraft Attitude Control Techniques by Simulation with a Multi-Body Flexible Appendage Model’, 12th European Simulation Mult-conference, 16-19 June, 1998, Invited Paper.

• S J Dodds, R Perryman and J Vittek, ‘Forced Dynamic Control of Shaft Sensorless Induction Motor Drives’, Symposium on Power Electronics, Electrical Drives, Advanced Machines and Power Quality’, Speedam’98, Sorrento, Italy, 1-5 June, 1998.

• C Kanesalingam, M C B Smith and S J Dodds,   ‘An Efficient Algorithm for Environment Mapping and Path Planning for an Autonomous Mobile Robot’  29th International Symposium on Robotics, Birmingham, U.K. April, 1998.

• A G Loukianov, Dodds,S.J., Hosny,W., Vittek,Y., "A Robust Automotive Controller Design", IEEE International Conference on Control Applications, Connecticut, Oct. 1997.

• S Jayasoma, S J Dodds,  R Perryman and G Hu, ‘Robust Vector Control of Synchronous Motor Drives with FPGA Orientated Algorithms’, Universities Power Engineering Conference, UPEC’’2002, Staffordshire University, Sheffield, September, 2002.

• W M Hosny and A Rojeab, ‘Annealing Technique to Improve the Power Loss and Flux Harmonics in Amorphous Magnetic cores’, Universities Power Engineering Conference, UPEC’’2002, Staffordshire University, Sheffield, September, 2002.

• W M Hosny, P Cabaj and B Dobrucky, ‘Control Strategy for Three Phase Four Wire Active Power Filter Using Neural Networks’, UPEC 2001, University of Wales, Swansea, September 2001.

---

© 2010